Engineering

All new and solved questions in Engineering category

4 answers

Carbon diffuses in iron via an interstitial mechanism—for FCC iron from one octahedral site to an adjacent one. Two general sets

Carbon diffuses in iron via an interstitial mechanism—for FCC iron from one octahedral site to an adjacent one. Two general sets of point coordinates for this site are 0 1/2 1 and 1/2 1/2 1/2 . Specify the family of crystallographic directions in which this diffusion of carbon in FCC iron takes pl...
4 answers

The critical frequency of an open loop op-amp is 500 Hz. If the gain ofmidrange is 175 V / mV:a)What is the ideal and actual gain

The critical frequency of an open loop op-amp is 500 Hz. If the gain of midrange is 175 V / mV: a)What is the ideal and actual gain at 500 Hz? b. Gives the bandwidth of the op amp...
4 answers

In 2020, Warehouse 13 had net credit sales of $850,000. On January 1, 2020, Allowance for Doubtful Accounts had a credit balance of

In 2020, Warehouse 13 had net credit sales of $850,000. On January 1, 2020, Allowance for Doubtful Accounts had a credit balance of $18,000. During 2020, $27,000 of uncollectible accounts receivable were written off. Past experience indicates that the allowance should be 10% of the balance in receiv...
3 answers

Which of the following are the keyaspects a technical engineer will beasked to do?A. Build and put togetherB. Design and structureC.

Which of the following are the key aspects a technical engineer will be asked to do? A. Build and put together B. Design and structure C. Deconstruct and analyze...
4 answers

One kg of gas is compressed adiabatically from 1 kg/sq. cm,1 cubic metre volume and 300 kelvin to 5 kg/sq. cm,0.5 cubic metre and

one kg of gas is compressed adiabatically from 1 kg/sq. cm,1 cubic metre volume and 300 kelvin to 5 kg/sq. cm,0.5 cubic metre and 400 kelvin. work transfer in this process will be...
3 answers

Procedure of electrical instrumentation

Procedure of electrical instrumentation...
4 answers

What are different types of distillation technologies used for ethanol and water distillation?

What are different types of distillation technologies used for ethanol and water distillation?...
1 answer

Distillation technologies

Distillation technologies...
4 answers

What setting do i dry my jordan max arua 2s on in the dryer will mark brainliest

What setting do i dry my jordan max arua 2s on in the dryer will mark brainliest...
4 answers

A procedure intended to establish the quality Performance or reliability of something especially before it is taken into widespread

A procedure intended to establish the quality Performance or reliability of something especially before it is taken into widespread use...
4 answers

Déterminez les forces dans les tiges FC et BC. Et indiquez si elles sont en tension ou encompression1.22 m, 1.22 mE!3.05 m3.05

Déterminez les forces dans les tiges FC et BC. Et indiquez si elles sont en tension ou en compression 1.22 m, 1.22 m E! 3.05 m 3.05 m G E 3.05 m MENE B 6 IN SEN [tex]Déterminez les forces dans les tiges FC et BC. Et indiquez si elles sont en tension ou en compres[/tex]...
4 answers

The small piston in a hydraulic lift has an area of 2.5 in². A force of 15 lbs is applied to the small piston. What is the maximum

The small piston in a hydraulic lift has an area of 2.5 in². A force of 15 lbs is applied to the small piston. What is the maximum force that the large piston will be able to exert if the area of the large piston is 300 in²?...
4 answers

Part A: Moore Company is about to issue a bond with semiannual coupon payments, a coupon rate of 8%, and par value of $1,000. The

Part A: Moore Company is about to issue a bond with semiannual coupon payments, a coupon rate of 8%, and par value of $1,000. The yield-to-maturity for this bond is 10%. a. What is the price of the bond if the bond matures in 5, 10, 15, or 20 years? b. What do you notice about the price of the bond ...
9 answers

How to find the ima of a wedge

How to find the ima of a wedge...
4 answers

Is f=ma dimensionally homogeneous.

Is f=ma dimensionally homogeneous....
4 answers

ALG 1 HON-06-02-206 (2022 / STUART MIDDLE SCHOOL - INT)Madison Worcesta 10/17/219 52 PMHomework: Slopel rate of changeQuestion

ALG 1 HON-06-02-206 (2022 / STUART MIDDLE SCHOOL - INT) Madison Worcesta 10/17/219 52 PM Homework: Slopel rate of change Question 0.5.2.3 > HW Seore: 40% 8 of 20 points Points: 0 of 1 Save A recipe for 16 apple cinnamon muffins calls for 1 cup of four. The number of multitat can be made varies ...
3 answers

Busco Novio quien se apuntaEdad 14

Busco Novio quien se apunta Edad 14...
4 answers

Trong một buổi hội thảo về quản lý các cơ sở nghiên cứu khoa học thuộc một Viện Hàn lâmnổi tiếng

Trong một buổi hội thảo về quản lý các cơ sở nghiên cứu khoa học thuộc một Viện Hàn lâmnổi tiếng Hoa Kỳ. Khi Giáo sư Kinh tế học W. Porter đang thuyết trình về quản trị thì có một thành viên – là một nhà hoá học nổi tiếng – tro...
2 answers

Use the Binomial Theorem to expand and simplify the expression.(y - 4)3

Use the Binomial Theorem to expand and simplify the expression. (y - 4)3...
4 answers

Sketch the intensity of the shear-stress distribution acting over the beam's cross sectional area, and determine the resultant shear

Sketch the intensity of the shear-stress distribution acting over the beam's cross sectional area, and determine the resultant shear force acting on the segment AB. The shear force acting at the section is V=23 kip. Show that Ina = 872.49 in^2 [tex]Sketch the intensity of the shear-stress d...

-- 0.097809--